Gently wipe the surface stains with a damp cloth.
It must be fully covered and protected with kraft paper or wooden boards.
Spray wax immediately upon completion and perform wet polishing.
The dust mop provides comprehensive dust removal and clears away debris.Stubborn dirt can be cleaned with a neutral cleaner and a wet mop.After the floor is completely dry, dry polish it with a 1000-1500 RPM polishing machine and a beige 3M polishing pad.No waxing is required for regular use
03. Current maintenance
Daily: Dust pusher dry dust removal;
Weekly: Wet mopping with neutral detergent → dry polishing;
Stubborn stains: Clean manually with neutral detergent and a red cleaning pad.
Severe pollution: Use a 150-175 RPM floor scrubber with a red brush pad for cleaning → Dry polish after thorough drying.
Regular as needed: dry polishing/wax spraying and wet polishing
Clean up stains as soon as possible to avoid penetration and leaving marks.
For heavy stains such as iodine tincture, a highly efficient stain remover can be used for quick wiping.
Cleaning principle: Gently scrape with a spatula, without using sharp tools. First, dry the stains to prevent them from spreading. Clean from the outside in. Rinse with a sponge in room temperature water, not hot water.
05. Important Notes
Do not drag sharp or heavy objects to prevent bumps and scratches.
Place dust removal MATS at the entrance to reduce the entry of sand and gravel.
For indoor use, provide appropriate shading along the Windows to prevent direct sunlight from causing fading.
Strictly prohibited: acetone, banana water, thinner, soap powder, scouring powder, 84 disinfectant.
Do not use scraping tools such as steel wool balls or hard brushes;
Do not place strong acids, strong alkalis, toluene and other liquids directly on the ground.
The maintenance cycle depends on the flow of people and the color of the floor.
Public security registration number:Hu Gong Wang An Bei No. 31011202006730 Privacy Statement
